MIMAKI (THAILAND) CO., LTD.

FineCut9 for CorelDRAW

FineCut9 for CorelDRAW Ver1.3(CorelDRAW X7 ~ 2019 (32 bit/64 bit))

Type Software
Version 1.3
Release date 01/10/2020
Supported OS Windows 7
Windows 7 (32bit)
Windows 7 (64bit)
Windows 8.1
Windows 8.1 (32bit)
Windows 8.1 (64bit)
Windows 10
Windows 10 (32bit)
Windows 10 (64bit)
Remarks

CorelDRAW® Graphics Suite X7/X8/2017/2018/2019 (32 bit/64 bit)
English/German/Italian/French/Portuguese/Spanish/Russian/Simplified Chinese/Traditional Chinese

CorelDRAW® Technical Suite X7/2017/2018/2019 (32 bit/64 bit)
English/German/French

Supported Software FineCut9 for CorelDRAW

About this Upgrade software

  • This Upgrade software requests older version of Mimaki FineCut CD-ROM while installation.
  • How to issue a serial key, please see here.

The following functions have been change

[Ver1.1 -> Ver1.3]

- Improved function -

  1. Camera for Gravotech laser is now supporeted.
    • The register marks are detected by the cameraautomatically to output.
    • The new function can be used only by the Gravotech laser model with camera.

-Fixed bugs -

  1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected.
  2. The output condition setting function by each color and layer for CF3 (M head) can be now used.
  3. When register marks were recognized during CF3 (M head), the cut preview display was misaligned. The problem has been improved.

[Ver1.0 -> Ver1.1]

- Improved function -

  1. CJV300 Plus is supported.
  2. CG-FXⅡPlus is supported.

New functions / Improved functions of FineCut9

  1. CorelDRAW 2019 is supported.
  2. It can be now outputted directly to Trotec Speedy 100/300/360/400.
    It can be outputted by the procedure that outputs to Mimaki plotter.
    Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
  3. It can be now outputted directly to Gravotech LS series.
    (Gravotech driver installation is required.)

    It can be outputted by procedure that outputs to Mimaki plotter.
    Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.

For Gravotech LS series users

Please download the driver from this Gravotech's site and install it according to the manual of the same site.

About manuals

Download from here.

Precautions for download

Be sure to read the following license agreement before downloading this software.

Software License Agreement

By installing this software, you agree to be bound by this agreement.

Article 1 Definition
  1. Software means the computer program supplied with this agreement.
  2. Related data means printed text data supplied with this software or printed data which we may supply subsequently.
  3. This software means the software, related data and the copy of this software which we supply to you.
Article 2 Limitations
  1. This software must not be copied against the provisions of this agreement.
  2. This software must not be changed or reverse engineered. Moreover, it must not be transferred, leased or sublicensed to the third party. The status of this agreement must not be transferred, either.
  3. This software must not be transferred, licensed or resold to the third party or transferred, licensed or purchased from it by rental or false rental activity.
  4. This software must not be transferred or licensed to the third party or purchased from it as secondhand goods.
Article 3 Limitation of Warranty
  1. It is not warranted that functions contained in this software suit the intended use of the customer.
  2. This software should be selected and introduced in the customer’s responsibility: any damage in installing this software in the computer’s hard disk and the plotter’s memory is not covered.
  3. We accept no responsibility for any results of the use of this software (including lost earnings or profits).
Article 4 Term of Validity
  1. The term of validity of this agreement starts when the customer installs this software.
  2. When the customer decides to stop using this software, this agreement is automatically terminated.
  3. This agreement is terminated immediately, without our notice, if the customer does not follow any clause of this agreement. If this agreement terminates, the whole of this software must be deleted.
Download FC913CD.EXE(354.09MB)

Return back to list

Return to Content

PAGETOP