• Return back to list

FineCut/Coat9 for Illustrator Ver2.3 Mac (Illustrator 2019 - 2022 (macOS 10.15~macOS 12))

Type	Software
Version	2.3
Release date	03/01/2022
Supported OS	macOS 10.15.x macOS 11.x macOS 12.x
Supported Software	FineCut/Coat9 for Illustrator
Application	Adobe Illustrator CC2019/2020/2021/2022 English/German/French/Italian/Spanish/Russian/Simplified Chinese/Traditional Chinese

About this Upgrade software

• FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
• Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
• How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.

About installer and others

• FineCut / Coat9 does not work properly with Illustrator 2021 Ver25.0 to Ver25.2.0.
  Please use Illustrator 2021 Ver25.2.1 or later.
• When installation of FineCut/Coat9 in macOS is failed, please refer to here to take measures.
• How to recognize [KeySpan] USB conversion adapter on macOS High Sierra(10.13) from here.
• The serial key issuing tool (DiscChecker) does not support macOS 12.0 or later. Issue a serial key with a Mac which has installed macOS 11 or less, or Windows PC.
• This software cannot be installed in OS that is earlier than MacOS X 10.15. Please use this when you use OS that earlier than MacOS X 10.15.

The following functions have been change

[Ver2.2 -> Ver2.3]

- Improved function -

1. CG-AR series is supported.
   With the division cutting function, cut misalignment due to sheet meandering can be suppressed.
2. CJV330 series is supported.

-Fixed bugs-

1. When installing on macOS 12.1 or later, "Adobe Illustrator was not found ...." is displayed.

[Ver2.1 -> Ver2.2]

- Improved function -

1. Illustrator 2022 is now supported.
2. macOS 12 (Monterey) is now supported.

-Fixed bugs-

1. When the cut data is created using the following functions, it is printed by RasterLink5.
   Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line].
2. When "Online information" is started, [Error in the parameter.] is displayed and information cannot be obtained.
3. Even if [Leaf Mode] is specified in [Detect Mark] function of Plot dialog, it will return to [Roll Mode] when [Detect Mark] is executed at the next time.

[Ver2.0 -> Ver2.1]

- Improved function -

1. Illustrator (Ver25.3 or later) which supports native support to Apple Silicon is supported.
   FineCut/Coat9 for Illustrator Ver2.1 is supported only in the following System requirements.

   Chip	Intel		Apple Silicon M1 Chip
   Illustrator (Ver25.3 or later) Running mode	-		Rosetta		Native
   macOS Appearance	Light	Dark	Light	Dark	Light	Dark
   FineCut9 Ver1.5	×	×	×	×	×	×
   FineCut9 Ver1.6 - 2.0	○	×	○	×	×	×
   FineCut/Coat9 Ver2.1	○	○	○	○	○	○

-Fixed bugs-

1. Illustrator exits incorrectly when executing Frame Extraction, Create Shadow / Edge, Trapping, Create Weed Line on Illustrator 2021 (Ver25.4.1).

[Ver1.6 -> Ver2.0]

- Improved function -

1. The product name has been changed.
   FineCut9 -> FineCut/Coat9

-Fixed bugs-

1. Fixed the problem that the import / export of the output condition fails depending on the save location of the Output Condition file.
2. Fixed the problem that the installation is failed in some environments.

[Ver1.5 -> Ver1.6]

- Improved function -

1. Illustrator 2021 (Ver25.3) is supported.
   FineCut9 for Illustrator Ver1.6 is supported only in the following System requirements.

   Chip	Intel		Apple Silicon M1 Chip
   Illustrator (Ver25.3 or later) Running mode	-		Rosetta		Native
   macOS Appearance	Light	Dark	Light	Dark	Light	Dark
   FineCut9 Ver1.5	×	×	×	×	×	×
   FineCut9 Ver1.6	○	×	○	×	×	×

-Fixed bugs-

1. Even if EPS option or Adobe PDF save dialog is canceled with ID cut, the cut command is outputted.

[Ver1.4 -> Ver1.5]

- Improved function -

1. macOS 11 (Big Sur) is supported.
2. Illustrator 2021 is supported.

-Fixed bugs-

1. Fixed a bug in which guidelines created by compound paths were output as cut lines.
2. Fixed a bug in which login user names containing double-byte characters would be recognized as guest users.
3. Illustrator may crash when using [LineEdit] tool has been fixed.
4. Fixed a bug in which exporting the output condition with a folder name or file name that contains double-byte characters will fail.

[Ver1.3 -> Ver1.4]

-Fixed bugs-

1. In CF22-1225, the issue that [Reverse Cut Mode] may not be performed correctly has been fixed.
2. On macOS 10.15, FineCut9 serial key cannot be issued by the serial key issuing tool  problem has been fixed.
3. A crash problem when FineCut9 is installed on the Korean version of Illustrator has been fixed.
4. The new information of FineCut9 can be acquired through the online information from this version.

[Ver1.2 -> Ver1.3]

- Improved function -

1. Illustrator 2020 is supported.

-Fixed bugs-

1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected .
2. The output condition setting function by each color and layer for CF3 (M head) can be now used.

[Ver1.1 -> Ver1.2]

- Newly Support -

1. macOS 10.15 (Catalina) is supported.

[Ver1.0 -> Ver1.1]

- Improved function -

1. CJV300 Plus is supported.
2. CG-FXⅡPlus is supported.

[FineCut8 Ver8.7.7 -> FineCut9 Ver1.0]

- Fixed bugs -

1. When operating weed line in the Weed Line dialog, a problem with slow operation occurred.
2. The maximum number of favorites have been increased from 10 to 250, so that the problem, the favorite was not registered when there were more than 10 layer colors.
3. Size in plot preview dialog was not be able to be changed smoothly with mouse.
4. List display disappeared when you moved the color/layer in the plot preview dialog.
5. The output condition was not able to be saved by accounts other than the administrator privilege.

New functions of FineCut/Coat9

New functions

1. It can be now outputted directly to Trotec Speedy 100/300/360/400.
   It can be outputted by the procedure that outputs to Mimaki plotter.
   Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
2. CJV300 Plus is supported.
3. CG-FXII Plus is supported.

About manuals

Download from here.

Precautions for download

Be sure to read the following license agreement before downloading this software.

Return back to list