Specifications

		UCJV330-130	UCJV330-160
Print head		On-demand piezo head (2 staggered layout)
Print resolution		Y: 600, 1200 dpi X: 600, 1200, 1800 dpi
Print gap		By manual 3 levels (2.0/2.5/3.0 mm)
Ink	Type/Color	LUS-170：C,M,Y,K,Lc,Lm,W,Cl LUS-175：C,M,Y,K,Lc,Lm,W,Cl *1 LUS-200：C,M,Y,K,W LUS-190：C,M,Y,K,W *1 LUS-210：C,M,Y,K,W *1
	Capacity	1L bottle
Ink circulation		Circulation in damper MCTv2
Maximum print width		1,360mm (53.5")	1,610mm (63.4")
Media	Maximum width	1,370mm (53.9")	1,620mm (63.8")
	Thickness	1 mm or lower
	Roll diameter	φ250 mm or less
	Mountable no.	Standard : 1 roll / Option : 3 rolls (with the Media changer)
	Roll weight	One roll：Max. 45 kg (99.2 lb) or less Three rolls：Total 90 kg (198.4 lb) or less
	Roll inside diameter	2 inch / 3 inch
Media cutting		Auto cutting by cutter of head unit *2
Cutting function	Cutting speed	Max. 300 mm/s
	Acceleration	Max. 0.5G
	Cutting pressure	10 - 450 gf
	Cutter response times	10 times/sec
	Repeatability	±0.2 mm (Excluding shrinkage / expansion caused by the film temperature)
Interface		Ethernet 1000 BASE-T (Recommended) / USB2.0 Hi-speed
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, Energy Star, RCM, KC, UKCA
Power supply		Single phase AC100-120V±10% /12A or Single phase AC200-240V±10% /6A 50/60Hz±1Hz
Power consumption		Max.1,440W or less ×1 / 800W (Continuous operation) / 4.5W or less (Sleep mode)
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level
Dimensions (W x D x H)		2,640 x 800 x 1,480mm (103.9 x 31.5 x 58.3")	2,890 x 800 x 1,480mm (113.8 x 31.5 x 58.3")
Machine weight		217kg (478.4 lb)	227kg (500.4 lb)

*1 Only available in specific countries
*2 Cut shape can be V-shaped cut or straight cut.

Ink set

LUS-170 ［C,M,Y,K,Lc,Lm,W,Cl］	C　M　Y　K
	C　M　Y　K　Lc　Lm　W
	C　M　Y　K　W　Cl
LUS-175 ［C,M,Y,K,Lc,Lm,W,Cl］	C　M　Y　K
	C　M　Y　K　Lc　Lm　W
	C　M　Y　K　W　Cl
LUS-200 ［C,M,Y,K,W］	C　M　Y　K
	C　M　Y　K　W

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---