Specification

Specifications

JV34-260
Head		On-demand Piezo head (Array of 2 staggered print heads)
Maximum width		2,632mm(103.6")
Print resolution		540,720,1,440 dpi
Print speed (4-color mode)	High speed	29.9m²/h (540×720dpi,4pass,bi-directional)
	Standard	21.4m²/h (540×1,080dpi,6pass,bi-directional)
	High quality	13.2m²/h (540×1,440dpi,8pass,bi-directional)
Ink	Solvent ink	SS21 (C,M,Y,K,Lc,Lm)
	Sublimation ink	Sb53, Sb54 (Bl,M,Y,K,Lbl,Lm)
	Ink supply system (4-color mode)	440 ml ink cartridge: 2 x per color (880 ml ink/color) MBIS (2 l ink container): 2 x per color (4 l ink/color) *1
	Ink supply system (6-color mode)	440 ml ink cartridge: 1 x per color (440 ml ink/color) MBIS (2 l ink container): 1 x per color (2 l ink/color) *1
Media	Size	210mm~2,642mm (8.2"~104.0")	210mm~1,620mm (8.2"~63.9") (narrow take-up device)
	Weight	100kg (220 lbs.)	25kg (55 lbs.) (narrow take-up device)
	Roll diameter	φ250mm (9.8")	φ180mm (7.0") (narrow take-up device)
	Inside roll diameter	3 inch	2-3 inch (narrow take-up device)
	Print aspect	Inside/outside
Media cutter		Y-direction cutter after head section
Media heater		3 stage intelligent heater (pre/print/after)
Media dryer		Post-heating and automatic drying fan
Interface		USB2.0
Applicable standard		VCCI class A,FCC class A IEC60950, CE Marking (EMC pass,voltage and machine),CB Report
Power specification		AC100~120V±10%,AC220~240V±10%,50/60Hz±1Hz
Power consumption		2 x less than 1,440W
Operational environment		Temperature: 20°C-35°C (64-95 °F); Humidity: 35-65 % RH (non condensing)
Dimensions (w)x(D)x(H), weight		3,650 × 1,302 × 1,424 mm (143.7" × 51.3" × 56.1") /465kg (1,025 lbs.)

*1 Optional Mimaki bulk ink system 2 (MBIS2) is required for using 2L Ink pack.

Ink set

SS21 ［C,M,Y,K,Lc,Lm］	C　M　Y　K
SS21 ［C,M,Y,K,Lc,Lm］	C　M　Y　K　Lc　Lm
Sb53 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K
Sb53 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K　Lbl　Lm
Sb54 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K
Sb54 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K　Lbl　Lm

Some of the samples in this website are artificial renderings.
Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.

JV34-260 Catalog (689.33KB)