Specifications

		CG-100SRII	CG-130SRII
Acceptable sheet width		90-1,250mm (3.54"-49.2")	90-1,550mm (3.54"-61.0")
Effective cutting area *1		1,070mm (42.1")	1,370mm (53.9")
Maximum cutting speed		85 cm/s (33.5"/s) (at the angle of 45)
Adjustable speed range *2		1-10cm/s:1cm step adjustment (0.39"-3.94" /s:0.39" step adjustment)
		10-60cm/s 5cm step adjustment (3.94"-23.6" step adjustment)
Repeatability		0.2mm / 2m (Excluding shrinkage / expansion caused by film temperature)
Effective Repeatabilit		1,050mm x 2m	1,350mm x 2m
Pen pressure		400g
Range of down pressure	Cutter	10-20g (2g step), 20-100g (5g step), 100-400g (10g step)
	Pen	10-20g (2g step), 20-100g (5g step), 100-150g (10g step)
Acceptable sheet *3		Vinyl up to 0.25mm (0.01") thickness, Fluorescent type vinyl, Reflective sheet
Applicable tools *4		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Type of command		MGL-IIc / Ic1
Interface		USB,RS-232C
Receiver buffer size		30MB Standard
Operational environment		5-35°C (41-95 °F), 35-75 %(Rh) Non-condensation
Power requirement		AC100 V-240V, 120VA or less
Dimensions (WxDxH)		1,435mm (56.5")x580mm (22.8")x1,125mm (44.3")	1,735mm (68.3")x580mm (22.8")x1,125mm (44.3")
Weight (with stands)		38kg (83.8lbs)	44kg (97.0lbs)

All trademarks or registered trademarks are the property of the respective owners. Specifications are subject to change without notice.

• *1: Maximum sheet feeding length for differs depending on the software.
• *2: Restricted sheet width.
• *3:Provided that the blade specific for fluorescent type vinyl (SPB-0007)and the blade specific for reflective sheet (SPB-0006) are used.
• *4: Thegoods on the market are φ8-φ9.Noguarantee for with accuracy and image quality.

---