- Please see the following.
Required Items:
- Adobe System [Illustrator (Mac version)]
- Power PC or Macintosh PC that has Intel CPU installed.
([FineCut] is supported by MacOS9.2.2, 10.2.6 or higher )
Go to FineCut Product page to see the specifications of OS and Illustrator that supports
[FineCut].
- Cable to connect PC and the printer
[CG-SRIII Series]
USB2.0 cable, RS-232C crossover cable or LAN cable.
[CG-FXII Series/CG-100SRII]
USB2.0 cable or RS-232C crossover cable.
[CG-60SR]
USB2.0 cable *RS-232C crossover cable is not supported.
The following items come with the printer.
- [FineCut] (Illustrator plug-in cutting soft), [SimpleCut]
*[SimpleCut] is not supported by MAC environment.
*[SimpleCut] comes with CG-60SR, CG-100SRII, or CG-100SRIII only.
- Cutter holder (1)
- Eccentric cutter (low-pressure blade for PVC) (1)
- Ball point pen (1)
- Pen adapter (1)
System Structure for Mac environment
[FineCut] converts the data that is created by user’s Illustrator into the command that is supported by MIMAKI cutting plotter.
[Connection Example 1]
Connect directly with USB cable.
We have the following options ready.
- 5m USB2.0cable (OPT-J0137)
* Use LAN cable in store when connecting Ethernet with CG-SRIII Series.
[Connection Example 2]
Connect it with RS-232C serial cable via USB serial conversion adapter (Keyspan).
We have the following options ready.
- USB serial conversion adapter (OPT-SS036)
- RS-232C serial crossover cable (RSC-32-05: 5m)