Mimaki Official Customer Support Channel
Operation guides, daily maintenance procedures and other useful videos are available on the customer support channel.
New video introduction
Cleaning under the carriage
Cleaning frequency: Daily
Please perform the maintenance after work
end of the day.
Cleaning around the wiper
Cleaning frequency: Daily
Please perform the maintenance after work
end of the day.
Cleaning the cap rubber and NCU
Cleaning frequency: Daily
Please perform the maintenance after work
end of the day.
Recommended videos
330serie
Waste Ink Tank Replacement
Replace the waste ink tank when
"Check waste ink tank"
is displayed on the display.
330serie
Nozzle Washing
If printing defects (e.g., nozzle clogging
or deflection)remain unresolved even
after head cleaning apply
nozzle washing to the print head.
Nozzle recovery setting method
If the missing nozzle of a specific nozzle
cannot be recovered, you can print by using
another nozzle instead of using that nozzle.
Carriage Underside Cleaning
Maintenance frequency: Once a week
"Please go when you have finished working
for the week."
2L ink pack How to set
Set the ink pack correctly and use it.
330series
Cleaning and replacing wipers
Maintenance frequency: Once a month
Wiper replacement: "Wiper end" on the
machine screen please replace it when
is displayed.
330series
Cap Rubber Cleaning
Maintenance frequency: Once a week
"Please go when you have finished working
for the week."
UJF-30/6042MkⅡ(e)
Head nozzle surface maintenance
Maintenance frequency: 1 to 3 times a day
UJF-30/6042MkⅡ(e)
Nozzle wash
UJF-30/6042MkⅡ(e)
Nozzle recovery setting method
For other support videos, please see "Mimaki Support Video Official Ch.".
