1. Jog Mode Functions

2-Point Line Correction [AXIS CORRECT]

Aligns the vertical and horizontal axes of the machine with the vertical and horizontal lines printed on the loaded graph paper.
Corrects the axis tilt (θ) using the set origin and correction point.

2-Point line correction figure
  1. Press the [REMOTE] key to select local mode.
  • Press the [REMOTE] key to confirm beforehand that cutting (printing) is not performed even in remote mode.
  1. Use all jog_ to set the origin, then press the [ENTER/HOLD] key.
  1. Use all jog_ to select jog mode.
  1. Press the [SHEET] key.
  1. Use all jog_ to move to the correction point.
  • θ range: -45° to 45°
  1. Press the [ENTER/HOLD] key to confirm the correction point.
  • The message "AXIS CORRECT θ = **" appears for a short time, before the machine reverts to local mode.
  • To clear the correction point, first push the clamp lever back to the rear, then repeat sheet detection. Note about sheet detection