The inkjet printer with Print & Cut function can be used to create original stickers.
The full operation of Print & Cut of favorite design to PVC sheet is completed with one same device.
It is suitable for various kinds of small quantity production as the inkjet printer with Print & Cut can create just a desired amount of desired design.
1. Data creation
Using the design creation software Illustrator, with its plug-in cutting software [FineCut], create a Print & Cut EPS-format document.
1-1. Create freely an illustration by Illustrator.
1-2. Please open a new artboard of A4 size from [New] of [File]. Choose your favorite design and arrange it on the artboard.
1-3. When the arrangement is fixed, make cutting lines and register marks with [FineCut] and save the data in EPS format.
(Register mark: Mark for cutting line detection)
For details, please see [How to] Window film.
2. Print the data
For the first, please print the data on a sticker sheet using the Print & Cut inkjet printer and RIP software [RasterLink].
*The image shows the RasterLink6 setting screen.
2-1. Open [RasterLink] of the PC connected to the printer and input the data to confirm the print condition and print place.
2-2. When they are confirmed, you can start printing.
Select 'Print after RIP' and click 'Start' to print.
Next, cut with the Print & Cut inkjet printer and [FineCut].
3-1. When the print is completed, open the data with Illustrator of the PC connected to the printer.
3-2. Hide every layer except the cutting lines and the register marks layers.
Click on the eye symbol in the layer menu to close the eye to hide a layer.
3-3. Select all the cutting lines and the register marks with [Ctrl] and [A] buttons and open the window for setting cutting condition of [FineCut].
*The image shows the FineCut8 setting screen.
3-4. Detect the register marks printed by the printer with sensor. Then switch to [Remote] mode of the printer.
Set the red pointer inside the corner of the register mark to recognize it.
3-5. Back to the PC window and click on the [Register Mark] tab and select [Detect Mark] to detect the register marks.
3-6. Click the [Plot] button to start cutting!
3-7. When cut is finished, the original sticker is created!
- CJV330 Series
Print & Cut Inkjet Printer | Size: 1.3 / 1.6m | Ink: Solvent | Max.speed: 100.0m²/h | Orange & Light black | Supports ID-cut | XY slitter & Media changer
- CJV300 Plus Series
Print & Cut Inkjet Printer | Size: 1.3 / 1.6m | Ink: Solvent / Sublimation | Max.speed: 105.9m²/h | Orange & Light black ink | Eco cartridge | Supports ID-cut
- UCJV300 Series
Print & Cut Inkjet Printer | Size: 0.8 / 1.1 / 1.3 / 1.6m | Ink: UV | Max.speed: 25.8m²/h | 4-layer/5-layer print (7 colors) | Supports ID-cut
Print & Cut Inkjet Printer | Size: 1.6m | Ink: UV | Max.speed: 13.4m²/h | Supports ID-cut