Pen Line Rubber Replacement
The pen line rubber forms the surface over which pen plotting, cutting, and creasing are performed.
Replace when the pen line rubber is excessively damaged, deformed, worn, or lifting, and when cutting quality has deteriorated.
- Use tweezers to peel off the end of the pen line rubber.
- Wipe off any adhesive remaining in the platen slot with alcohol.
- Attach the double-sided tape provided into the platen slot.
- Peel off the backing paper from the double-sided tape.
- Attach a new pen line rubber on top of the double-sided tape.
- Make sure the pen line rubber is laid flat.
