Cutter Replacement
Replace cutters when blades are chipped or blunt.
- Avoid touching the cutter blade. Failure to do so may result in injury.
- Do not shake or swing the cutter holder. Doing so may cause the blade to come off.
- Rotate the adjusting knob to extend the cutter blade fully.
- Use tweezers to pull out the cutter.
- If the blade is chipped and difficult to remove using tweezers, remove the black cover to facilitate replacement. Take care not to injure yourself by handling the blade directly and to avoid dropping it.
- Insert a new cutter into the cutter holder using tweezers.
- Check the orientation of the cutter before inserting it fully.
