1. Feed Settings [FEED OPTION]

VIEW FEED Setting

The view feed can be set to enable/disable feed operation after test cut.

  1. Press the [FUNCTION] key in local mode.
  1. Use updown jog_ to select [SET UP], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select [FEED OPTION], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select [VIEW FEED], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select the setting, and press the [ENTER/HOLD] key.
  • Setting: ON/ OFF
  1. Press the [END] key several times to exit.