2. Helpful Tips
3. Changing the Cutting Sequence [SORTING]
4. Setting Sorting

1. Changing the Cutting Sequence [SORTING]

Setting Sorting

1. Press the [FUNCTION] key in local mode.

2. Use to select [SET UP], then press the [ENTER/HOLD] key.

3. Use to select [SORTING], then press the [ENTER/HOLD] key.

4. Use to select [ON], then press the [ENTER/HOLD] key.

5. Use to select the [AUTO FEED] setting, then press the [ENTER/HOLD] key.

• Select [ON] if auto feed is required.

6. Use to select the [AREA] setting, then press the [ENTER/HOLD] key.

• Setting: OFF or 10 to 5,100 cm (in 10 cm increments)

7. Press the [END] key several times to exit.

• The settings are retained even when the power is turned off.
• Altering the setting clears the receive buffer contents.
• Enabling sorting reduces the receive buffer size to approximately 20 MB.